The plug for a dryer that is electric optional, because, in lots of houses, the applying is hardwired into the home circuitry. Then you may need to install a plug — or pigtail — yourself if your house has a 240-volt receptacle for the dryer. The nationwide Electric Code has mandated grounded plugs on dryers since 1996, therefore modern pigtails have four cables in place of three. Setting up a pigtail appears like a project that is complicated but it is actually a straightforward procedure that anybody can do. The pigtail cables have ring lugs, and you also just connect these to your terminals that are appropriate the dryer.
Choose the terminal that is electrical regarding the back of this dryer. It’s often close to the flooring. Unscrew the panel address having a Philips screwdriver and take away it.
Note the colors associated with terminal screws within the dryer. Two are brass, one is silver and something is green. The metal terminals are hot, the silver is basic therefore the one that is green for ground.
Unscrew one of several metal screws and insert it through the band lug on either the black colored or wire that is red the pigtail. Both of these cables are both hot and so are interchangeable. Drive the screw back in the panel and tighten up it to securely hold the wire. Link the other hot cable to another terminal within the way that is same.
Connect the white cable https://hookupwebsites.org/myfreecams-review/ to your silver terminal in addition to green cable towards the green terminal. When the cables are connected, secure the pigtail towards the dryer by feeding it through the integrated cable clamp and tightening the clamp. Okumaya devam et